Blog
Note
Work in progress… pending migration of posts from my old personal site
How to Calibrate a Sonoff Pow R2
In this post I explain how to calibrate a Sonoff Pow R2 so that its measurements are more accurate
•
3 min read
Building a Kubernetes Cluster with Raspberry Pi (Part IV)
Fourth part of a series where I explain how I built a Kubernetes cluster using Raspberry Pi. In this article I describe the mechanism I use to measure the cluster's power …
•
8 min read
Building a Kubernetes Cluster with Raspberry Pi (Part III)
Third part of a series where I explain how I built a Kubernetes cluster using Raspberry Pi. In this article I explain how to install Kubernetes with k3s.
•
1 min read
Building a Kubernetes Cluster with Raspberry Pi (Part II)
Second part of a series where I explain how I built a Kubernetes cluster using Raspberry Pi. In this article I describe which operating system to install on the nodes and how to …
•
8 min read
Building a Kubernetes Cluster with Raspberry Pi (Part I)
First part of a series where I explain how I built a Kubernetes cluster using Raspberry Pi. In this article I describe the hardware and physical infrastructure used.
•
3 min read
How I automated my company's time tracking
In this post I explain the project I developed to automate my company's time tracking
•
7 min read
